Arrow spinner for games and other uses
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arrow spinner on a base plate. Perfect as replacement for many games or to make a new one.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 40
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Need new spinning arrow for twister, or other game. Or You are making your own one?
Or maybe You just need some help with decision making?
This is for You!
The arrow is on the swivle nut.
The base plate is 200x200mm with threaded pin in the center.
How to print?
The arrow has to be print in place. 0,4mm nozzle works well. 0,2mm layer high is recommended. No supports needed. for durability just use at least 3 perimeters and infill with enhance layers adhesion (e.g. gyroidal).
The low tolerance model of the arrow is increased in X and Y dimensions by 1,5% for the nut and 3% for the arrow.
Template.
195x195 mm square with 25mm bore in the center.