1 / 1
Beehive Candle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two piece mold that does not need mold release agents or tape.
In my tries it was sealing well without. No big mold cleanup necessary for reuse.
Print with snug support. If you use beeswax it needs to be out of ABS or ASA for improved glass transition temperature.
If you use soy wax then PLA is probably good enough.
You can add oils or pigments for smell and colour.
Melt wax at 80 degrees in the oven. Take out. Wait until small crust has formed on top of the bowl. Add additives and stir. Pour in one go.
Of course place wick before use. I used a wooden stick with a double sided tape to hold the candle wick in the center on top.