Mr.Monopoly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Mr.Monopoly
200x200mm HueForge / 4 Color
Print instruction:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA MATTE eSun Deep Black Transmission Distance: 0.1
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Deep Black
At layer #8 (0.72mm) swap to Ash Gray
At layer #13 (1.12mm) swap to Gray
At layer #21 (1.76mm) swap to Jade White for the rest.
The Frame i used to display: https://makerworld.com/de/models/465237#profileId-385592