Side View 3DO Enclosure Cam for the RatRig VC4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little mount for the 3DO enclosure cam V2 designed to offer a side view in the RatRig VC4.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 66
- Makes
- 1
- Views
- 537
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hello!
Here is a little mount for the 3DO enclosure camera kit v2 that allows to have a side view of the print area by placing the camera in the area of the belt tensioner.
BOM:
2 x M3x12 hex skrews;
1 x M3 nut;
2x M2x8 countersunk skrews;
reuse the original M6 skew and t-nut from the replaced right Y bumper.
An exploded view of the components to aid with assembly:
A few notes:
Pay attention to the white dots on the PCB, FCB cable and camera module, they should align when connecting the different components togheter.
The camera module is friction fit into the mount, adjust scalling in your slicer in case it does not work out for you.
Slighty tighten the bolt for the socket in order to be able to move the camera module into position after installing everything, tighten it a little more so that it does not move from vibrations.
If you enjoy my designs and want to support me, you can buy me a coffee here.