1 / 6
Chill guy snow form
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You need your own chill guy, you just don't know it yet! With under 50g of PLA and 2hours of print time you can get one.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I advise you to print the 1__snow-chillguy.stl, which is without handle, since it doesn't need any supports and its easier to use.
The print time of 1__snow-chillguy.stl should be around 2 hours.
The form works for fresh snow,
if the snow is frozen, it might break the nose after removal from the form.
For the project I used @Davidw3doit 's chill guy:
https://www.printables.com/model/1084466-chill-guy