1 / 2
Guitar Pickguard Pickup Switch Slot Routing Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To guide a rotary tool router to cut the slot for an F-style pickup switch
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 61
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to use with these two rotary tool router bases:
- For metric thread machine: https://www.printables.com/model/1156447-rotary-tool-dremel-like-router-base-with-metric-th
- Machine with Dremel thread: https://www.printables.com/model/558275-dremel-router-attachment-screwing-cappabilities
Usage:
- Attach the jig to the pickguard trough the switch mounting holes.
- Tilt the router so that the router bit doesn't touches the pickguard and lean it to the shorter side or the jig.
- Turn on the tool.
- Level the router while the base is constantly touching the sort and the long guide rails. It will drill into the material.
- Route the slot sliding the tool along the longer side of the jig.
- Turn off the tool.
- Lift the router.
- Remove the jig.
- Done :)
Watch your fingers!