Ryobi TS1551 miter saw insert plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement throat insert plate for Ryobi model TS1551 miter saw and maybe others.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
This is a replacement insert for a Ryobi 12" miter saw. The saw is quite old and I couldn't find this part to either buy or download, so I made this. Maybe someone else will find it useful. It may fit other Ryobi models, I have no idea.
I printed with both PETG and PLA, both were fine. There is a solid version for you to cut a kerf and a version with a 4mm kerf cut out. It is a little longer than 10" so I had to angle it on my printer for it to fit. You should print at 100% fill or close to it. This will give you a tight zero clearance plate on the non-kerf version (until you have to make a bevel cut anyway) . It takes about an hour and uses around 45g filament on the P1S.