Low-tech automatic watering pot
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.77 – €10.72 net (excluding VAT)
For file: Low-tech automatic watering pot_Simple_Smiling.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.74 excluding VAT (range midpoint).
- Weight reported by the author
- 161 g
- Print time reported by the author
- 7.87 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tired of seeing your aromatic plants die? With this low-tech automatic watering pot, no more worries!
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 33
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of seeing your aromatic plants die? With this low-tech automatic watering pot, no more worries !
It is designed to accomodate a standard Ø11cm, h9cm aromatic pot and keep it alive. For the water supply, any empty jar less than 8cm in diameter will do. Just punch a few holes in the centre of the lid with a nail and hammer, fill it with water and insert it upside-down in the watertank slot. The system will ensure 1cm of water at the bottom of the plant slot, all you have to do is make sure the water tank isn't empty :)
As a bonus, I made three variants of the model :
- Simple pot with smiling face
- Simple pot without face
- Double pot without face
Print settings I used : PLA, 0.2mm layers height, minimum 4 walls, 15% infill, supports “everywhere”.
Printing time : about 8h on Prusa MK4.