Project Babble ESP32-S3 WROOM case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a Project Babble case for the ESP32-S3 WROOM with Vive facial tacker mounting.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 155
- Makes
- 1
- Views
- 1,111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial
A Project Babble case made for the wrooms boards made using Booleans in Blender.
made to work with a 160 degree fov ov2640 with a 75mm cable and two 5mm 850nm ir leds
recommend a right angle usb c cable to connect to the headset.
supports required i used organic on build pate only
Don't mind the temp wire out the side.
*Note that if your board has breadboard pins they will need to be de-soldered/removed.
*The flash port is only accessible with the back of the case off.
*V0.41 forgot to add relief in the lid for the ribbon cable. Added more tolerance for the led's.