Oxygen Tank accessories
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.09 net (excluding VAT)
For file: OxygenTankStatusTag-PartClickStop65_0.4n_0.15mm_PLA_MK4S_5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 5.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A few bits to make managing medical Oxygen easier
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Herein are a valve wrench with a coil lanyard and attachment clip as well as a clip-on tank status indicator. All can be printed in PLA without support, but the wrench requires at least 4 perimeters and 40% in-fill (more of both the better, some valves are tight) for strength.
The lanyard is from Amazon https://www.amazon.com/dp/B081R8GWCG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
The screw is a hex cap M3-8, but as it self taps , nearly any screw will do as long as the size is close.
Assembly is as shown in the exploded view