1 / 2
Core XZ motormount with knob tensioner v2 — image 1
1 / 2

Core XZ motormount with knob tensioner v2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

There are versions with T-nut mounting and with mounting on the frame's supporting screws.

Rating
0 / 5
Likes
5
Downloads
11
Makes
0
Views
345
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The mount was designed to transfer the kinematics from Voron Switchwire to Neptune 3 Pro. Besides that, it is suitable for all ender-3-like printers using corexz/hybridxz kinematics

To assemble the mounts, you will need: 

2 M4 screw 40 mm or longer 

4 M4 nuts 

8 M3 screws 35 mm for the motor

4 M3x26 din 912 screws to fasten mototrmount

4 M3*4.5*4.5 heat insert nut

4 M3*8 nuts

For mounting to the frame 

8 M4 screws (Length depends on the profile) 

8 T-nuts 

Or 

8 M5*60 screws (For mounting to the bearing screws of the Neptune 3 Pro frame)

 

If you find any problems during the use of the mount, please write in the comments

 

Tags