1 / 7
Kingroon KP3S Pro V2 Plate Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The guides allow you to easily and accurately install the PEI plate on the magnetic base
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 79
- Makes
- 1
- Views
- 430
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This printer is quite modern, it has a magnetic base and replaceable PEI plates, but the table does not have guides, as is done in current printer models.
These guides allow you to quickly and accurately install the plate on the table: place the back of the plate against the guides, then lower the plate completely onto the magnetic base
Printing
Use ABS plastic or other filaments that can withstand the heat of the bed up to 110 degrees Celsius.
PLA is not suitable
Installation
- Degrease the inside surface of the table (corners)
- Add a drop of superglue (cosmo) to the inside surface of the guides
- Install the guides
Notes
- Use plastic that can withstand 110 degrees Celsius
- The Z axis beam is very close to the table, I drew the guides so that they would fit on my printer, but you should check the clearance before gluing the guides