Lian Li O111D Mini 360mm Radiator Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an offset bracket for the Lian Li O11D Mini PC case. This will help adapt a 360mm radiator to fit in this case.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 562
- Makes
- 1
- Views
- 5,336
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I created this STL to help fit my Asus Ryujin ii 360mm radiator in the top of my Lian Li O11D Mini case. By default, this case is not made to support that large of a radiator on top.
Lian Li sells a bracket kit to do this very thing but they appear to always be out of stock with the supply chain delays/etc. I modeled this simple part to fill the need in the mean time.
This doesn't require any non standard mounting screws, and will protect your radiator from long screws damaging it. I used case fan screws on the thick side of this part, and the included radiator mounting screws to go from the bracket to the radiator.
I printed these at 60% infill using Atomic PETG. I wouldn't recommend PLA, but if it's all you have, it's worth a shot. My tolerances were a little bit off, so I ended up needing to drill out the case fan side with a 3/16th (3mm) bit to accommodate the screw easily. I chose case fan screws because they're plentiful, grip the bracket well, and are included with the O11D Mini.