1 / 4
Raspberry Pi5 52Pi NVDAC (0.7 deeper)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix where the screw mounts inside are 0.7 mm deeper. To fit the Pi and NVDAC with the supplied 2.5 mm screws
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Who has 2.5mm Cap Hat screws lying around? Well, I don't!
So I modified this awesome design from Jeepers01 to be a little (0.7mm) deeper on the inside so that the Pi with the NVDAC can fit and the connectors align properly. The downside is that the Pis is a bit loose but at least it fits properly even if your printer isn't properly calibrated.