UBBI Filament hub 4x
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smaller filament hub for mmu using UBBI
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 117
- Makes
- 3
- Views
- 816
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Smaller, easier to print uses UBBI
If paired with the optical filament runtout sensor by SilentFrost then the Hub to sensor distance is: 45mm or 60mm for the low friction version
For the low friction version, print as oriented and add a bit of support to keep it from tipping over, do not support the UBBI connector.
The magnet version requires you to add a pause mid print in order to place the magnets:
To do this you need to find the layer where the bridges are first formed, and then right click the layer curser on the side and add a Pause. Now print it and set the magnets inside, for best adhesion place the magnets with alternating polarity (Hallbach array).
Submit feature requests here!