1 / 3
F-84 Thunderjet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1:72 scale model of the F-84 Thunderjet, a U.S. jet fighter and ground-attack aircraft developed in the late 1940s.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 60
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Standard Digital File License
Assembly:
- Remove all components from the printbed and detach the supports. Sandpaper may be needed on the rear edge of the tail.
- Connect the wings to the fuselage, using the hole for the landing gear and direction of the wingtip tanks to determine orientation. Depending on the printer, the wings may or may not need glue. Use glue at own discretion. The wings should look like a “V” when viewed from the front and attached to the plane.
- connect the rear landing gear tyres to the mounts. Superglue is recommended as it dries extremely quickly.
- Connect the rear landing gear assembly to the underside of the wings.
- Connect nose wheel to the nose wheel mount with glue. Pliers are recommended.
- Join the nose wheel assembly to the underside of the nose using glue. Angling it forwards as shown in the pictures will make it easier to connect.
- Done!