1 / 1
Voron Trident fixed nozzle scrubber (parametric)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame mount for nozzle scrubber, but longer
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a redesign of the scrubber frame mount of for the Voron Trident. The original one was too short for me.
Print upside down, without supports, preferably with ABS because of the proximity to the hot bed, with Voron parts settings.
The differences are:
- The arm is a bit longer.
- It uses M3 screws instead of M5 screws to attach to the frame. The M3 screws can be used with hammerhead T-nuts instead of the roll-in T-nut that were required with the M5 screws.
Moreover, the model is parametric, here is the link to the file if you want to adapt it to your needs: