Civetta Mountain
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€38.52 – €47.08 net (excluding VAT)
For file: Civetta_Mountain_0.15mm_PLA_MK3S_1d23h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €42.80 excluding VAT (range midpoint).
- Weight reported by the author
- 447 g
- Print time reported by the author
- 47.05 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple Model made with Google Earth of the Civetta, a famous italian mountain
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 170
- Makes
- 1
- Views
- 1,184
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Introduction
This is a simple scale model of the Civetta, a famous Italian mountain. I did this by extrapolating the elevation data of the area from Google Earth, subsequently processing them with a special plugin The model aims to offer a good quality and fidelity of the buds, obviously with some approximation, if you have any advice or suggestions you can leave a comment :)
If you are interested in other peaks you can leave me a coffee in my paypal.me link and leave a comment with the name of the mountain, over time I will load other models
Printer Settings
The model can be made with every 3d printer with at least a 200*200 mm bed
For maximum quality and resolution I suggest to use 0.15layer height, 15% gyroid infill and a brim, especially if you don't have a Borosilicate glass (like ender 3) or a PEI steel sheet, the print takes about 48 hours with 0.15 QUALITY preset of the Prusa I3 MK3S
You can still use a classic glass plate (like that of the thinker SE in the picture), but a spray of lacquer becomes mandatory, otherwise the piece runs the risk of warping