Under Shelf Double Caliper Holder with 10mm Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a Caliper Holder however wanted to mount it under a shelf so it is within easy reach at my work desk.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I needed a similar caliper mount to that by Stelzenbach on Printables and Practical 3d Prints on Makerworld so I created this one based on these.
Two main differences being;
1. I have two calipers, one metal with 2 decimal place readout and one all plastic with 1 decimal place readout (when measuring mm) and I want to utilise the single mount.
2. I have a shelf on the wall behind my work desk. I wanted to mount the calipers underneath the shelf so that they are within easy reach.
In addition, I incorporated a 10mm x 1.5mm magnet to hold the metal caliper against the rear of the bracket so that it leaves the front portion clear for the plastic calipers which are the most commonly used set.