1 / 3
RC Forklift better mast
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Better mast, so less post-processing is required.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 80
- Makes
- 0
- Views
- 552
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Drop-in replacement for the original mast of the RC forklift by ProfessorBoots.
The original mast was too tight, so I made a looser one.
https://www.printables.com/model/1058749-3d-printed-rc-forklift-diy
Recommended print settings:
- Laying on its back
- Paint on supports (normal)
- 3 walls
- 0.2 mm layer height
- PLA is fine, PLA+ or PETG if you want something a bit stronger
- 25% infill