1 / 3
775 Spindle cap II
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A cap for this standard spindle design.
Print as oriented in the stl, delete whichever style you do not want; the hole is sized for a 20x12mm rocker switch.
Fit the lower half, I use a tight cable-tie to get a good fit. There are no mounting holes on the top of this spindle so you will need to use a cable tie like me, or glue.. ;-)
The top cap includes a cut-out for a recessed cable-tie to hold the wiring loom, use small self-tapping screws to join the two parts together.