1 / 1
Misano Track and Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Misano and stand. This was developed to be made in small printers, 200 x 200 should be fine. Easy to print & assemble.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
Misano and stand. This was developed to be made in small printers, 200 x 200 should be fine.
It was printed at a Ender 3 V3 KE with the following settings:
- 0.16 layer height
- 20% infill
- 3 perimeters
- nozzle 0.4mm
The track has its profile as a 5mm x 5mm and the pocket to fit has is 5.3mm x 5.3mm. With this settings I didn't need to use glue