1 / 4
Louvered Dryer for Boxing Glove
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A boxing-glove drying device, ventilated with louvers.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 259
- Makes
- 1
- Views
- 1,922
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- BSD License
This is an insert for a boxing glove, designed to make it stay open wider when not in use so that the sweat inside it can dry up. I use it for my Krav Maga gloves. Its dimensions are identical to Isaac Howard's dryer, but mine is ventilated with louvers instead of a lattice. This design has less surface area in contact with the glove, which may reduce trapped sweat.
Required Setup
- Bottom layers: 0
- Top layers: 0
- Infill: 0%
Suggested Setup
- Extrusion width: 120% of nozzle diameter¹
- Perimeters: Just enough for walls at least 2.4mm thick²
- External perimeters first³
- Brim⁴: 5mm
- Layer height: 50% of nozzle diameter¹
- Seam alignment: Nearest
- Supports: None
Notes
- Larger extrusions tend to produce saggy bridges.
- Thinner walls would weaken the adhesion between segments, which are attached only at their four corners.
- Printing internal perimeters first may produce saggy internal overhangs.
- Without a brim, the first layer may not adhere well to the bed.