HSW build plate holder

Build plate holder I designed for the Honeycomb Storage Wall.

I designed it for the BambuLab A1 mini's build plates, so it fits the 180mm * 180mm build plates (like the Prusa mini). 

I did not try it with a larger build plate yet.

Two versions: 

• One will press fit into the holes on the HSW inserts
• The other contains the clip, so you can attach it directly into the wall

Both need supports, and need to be printed with different orientations.

I recommend printing the press fit version on its bottom, and for the clip version, it may be best to use the slicer's auto orient feature.

Recommended print settings:

• 4 walls
• 0.2 mm layer height
• PLA is fine, PLA+ or PETG recommended
• 25% infill

Pressfit version:

• Laying on its bottom
• Tree supports (auto, or paint on the bottom of the horizontal top part)

Clip version:

• Auto orient
• Tree supports (auto)