1 / 3
Rose HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small HueForge Rose.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 77
- Makes
- 0
- Views
- 550
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Simple model of a rose
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 80x80mm in size
Filaments Used:
PETG GEEETECH BLACK Transmission Distance: 3
PETG Sunlu Red Transmission Distance: 10
PETG GEETECH White Transmission Distance: 7
This print uses 3 unique filaments
Swap Instructions:
Start with BLACK
At layer #10 (0.88mm) swap to Red
At layer #18 (1.52mm) swap to White for the rest.
The warning of floating areas can be ignored.
If you want to scale down the model don't scale down in the z direction (height)