1 / 3
RPi Camera Cable Slot for Ikea Lack Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an insert for the Ikea Lack enclosure to pass a Raspberry Pi camera cable through the top.
- Rating
- 4.75 / 5
- Likes
- 16
- Downloads
- 66
- Makes
- 4
- Views
- 788
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is an insert for the Ikea Lack enclosure to pass a Raspberry Pi camera cable through the top.
Assembly:
- Layout the position of the insert on the intended surface with a pencil. Mark two points, 25mm apart.
- Drill ¼ in. holes at the two marked points.
- Remove the material between the two holes. You can use a utility knife for the Ikea Lack enclosure.
- Apply CA glue and push in the insert.
The camera arm in the picture is this one by Marius Hornberger: https://www.prusaprinters.org/prints/70840-modular-mk3s-camera-arm-also-rpi-hq
The RPi4 case is by Stamos and remixed by Olivier to include a slot for the camera cable: https://www.prusaprinters.org/prints/32179-raspberry-pi-34-b-case-with-slot-for-camera-cable
https://www.prusaprinters.org/prints/24942-raspberry-pi-34-b-case