Secondary Dynamic Intake - A Secondary FTC Intake
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to be a complement to the Dynamic Intake: A smaller purpose-built pass-off intake designed for use with an arm.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This secondary intake was designed to complement the Dynamic Intake and expand on its capabilities. It allows the Dynamic Intake to function purely as a ground intake and takes the job of scoring. The Secondary Dynamic Intake has a special clip design to utilize the internal bearing of the Dynamic Intake to automatically align the two intakes together when transferring the Sample. This secondary intake is designed to be used with an arm, with included Tetrix mounting holes. Enjoy!
Parts List:
- Printed Parts
- Assorted M3 Bolts
- Assorted Small Rubber Bands
- Assorted Tetrix Bolts (6-32, for mounting)
- GoBilda Servo Hub Shaft (33mm)
- GoBilda Servo Motor
Print Tips:
All parts should be printed without supports. The only exception to this are the clip tips, they may need to need support. Brims may also be needed.
Assembly:
Let me know if you‘re interested in an assembly guide and full parts list.
Here is the Onshape Link for assembly reference.
Created by Marooned 19594 of the Golden Pirates