1 / 4
Drawer and Cabinet Label - Switchable Paper System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These 3D Printed labels allow for paper labels to be easily switched out.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Project Description:
These 3D Printed drawer labels allow for paper labels to be easily switched out while the label housing keeps a low profile to the drawer front. This system is to label drawers and cabinets. It is design to be glued to the drawer/cabinet face. Label is 89mm W x 38mm H x 6mm D.
Materials Required:
| Material | Unit | Qty |
| Pla | Grams | 30 |
| Gorilla Glue Gel Super Glue | Bottle | 1 |
Tools Required:
- 3D Printer
- Clamps
- X-acto Knife
Files:
Online Resources:
- N/A
Material Prep:
- Gather any type of PLA and load it into a 3D Printer
Production:
- 3D Print the following parts
- Drawer Label Back & Front (2 parts)
- Layer Height: 0.2mm
- Infill: 15%
- Wall Loops: 2
- Support: No
- Drawer Label Top Spacer (1 Part)
- Layer Height: 0.2mm
- Infill: 10%
- Wall Loops: 2
- Support: No
- Drawer Label Corner Spacer (1 Part)
- Layer Height: 0.2mm
- Infill: 10%
- Wall Loops: 2
- Support: Yes
- Drawer Label Back & Front (2 parts)
Post Processing:
- Using the Gorilla Glue Gel Super Glue, glue the front and back parts of the label housing together. Make sure to use a small amount of glue on the tabs only. Any glue that gets on the rest of their label housing will not allow for the paper to be slid in.
- Once the housing glue has cured, use an X-Acto knife to score the back of the label housing to bolster adhesion when glued to drawer face.