Canal Hummingbird Portafilter Spacer for Decent DE1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Canal Hummingbird spacers to use on Decent DE1 Espresso Machines - 2mm - 3mm - 9mm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Canal Hummingbird has clearance issues with some Decent DE1 Espresso Machine groupheads. I designed three simple spacers (2mm, 3mm, 9mm thick) to be sandwiched between the polymer and metal basket holder. This should give clearance to the group head.
2mm and 3mm (inverted set up)
The 2mm was tested on a Decent DE1 V1.3 and provided just enough clearance using the #4 and #5 portafilter ear adapters from Canal. You will need longer screws, M2 x 25, stainless.
9mm (lay flat not inverted)
I also made a thicker 9mm spacer that you can try to retain the lay flat. This hinders a bit of clearance on your machine. You will need M2 x 30 stainless screws
Printed with PETG but suggest going with something higher temperature like ABS. Glass temp on PETG is about 85c so this will likely soften overtime.
Note, I am using this as a temporary solution till Canal comes out with a permanent fix. This is not meant to be a permanent solution so please understand the risks. I am not responsible for any damage.