Storage Box (Rugged Box)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.39 – €0.47 net (excluding VAT)
For file: 2 Latches and 2 Pins_0.4n_0.2mm_PLA_MK4IS_24m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.43 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 24 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Small, stackable, sealed storage box with a lid and snap-on clips.
- Rating
- 0 / 5
- Likes
- 153
- Downloads
- 671
- Makes
- 1
- Views
- 3,790
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I was inspired by a few similar boxes I found online, so I redesigned one in my own way.
The box dimensions are 120 × 70 × 60 mm (internal dimensions: 116 × 66 × 56 mm).
I will upload more size options later.
Assembly:
- Screws:
- You will need six screws (DIN 912 M3 × 30 mm).
- The screws create their own threads as they are screwed in, so no prior threading is necessary.
- Stacking:
- The box and lid have slotted holes designed for printed slotted pins, allowing multiple boxes to be stacked securely.
- The pins snap into the lid with slight pressure.
- This feature is optional - use it only if you want to stack multiple boxes.
Printing:
- It is recommended to apply a glue stick when printing the latch and pin, as their contact area with the print bed is relatively small.
- For a textured finish, print the lid on a textured sheet to achieve a rough surface on top.