1 / 3
Andonstar AD407 - Mechanic LS720+ Ring Light - Microphone arm mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the Andonstar AD407. Allows you to attach a Mechanic LS720+ ring light. Allows attaching to mic arm.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement mount for the Andonstar AD407 microscope. It allows you to attach a Mechanic LS720+ polarized ring light. The whole contraption can then be mounted on a microphone arm with a 3/8 thread. Use a nut to lock in place. I'm using an Elgato Wave LP arm. Gives you a lot more freedom, than the standard platform.
Standard PLA is good enough.
- 4 walls
- 4 top/bottom layers
- 0.2mm layers is fine
- print flat side on bed
- no supports, fast print
Microscope holds in nicely by friction in the 35mm hole. Ring light attaches to the bottom ring.