1 / 3
Beseler 23C Enlarger Lens board with translucent viewing slot and M39 Jam nut — image 1
1 / 3

Beseler 23C Enlarger Lens board with translucent viewing slot and M39 Jam nut

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Beseler 23C enlarger lens board with a viewing window and an included M39 lens jam nut.

Rating
0 / 5
Likes
7
Downloads
51
Makes
0
Views
255
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I bought another enlarger lens to do a sharpness test between lenses but wasn't about to drop $50 for a used lens board. With some CAD magic and a few drafts, I was able to come up with this. This lens board is for M39 lenses and includes a small piece to press fit or glue in that in theory should provide light to show the aperture setting of your lens (varies by filament settings and filament translucency). I have also sketched up a M39 jam wingnut with big ears to easily tighten or loosen your lens from the lens board. 

 

Hopefully you don't have your enlarger exposing for minutes at a time but if you do, you may need to print this in PETG or ABS or PET-CF (if enlarger on for HOURS at a time). You should be able to get by with PLA but I have not tested that personally and have stuck to PETG. 

Tags