Honda S2000 Single DIN Pocket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pocket to replace the factory single DIN radio.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 136
- Makes
- 0
- Views
- 789
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a pocket to replace the factory single DIN radio and should work on all model years (tested on a 2007). There's two versions, long and short but both will work with the factory radio brackets to mount. Try to use a M5 screw that's 5mm long or a heat set insert with matching screw.
Long version has the same dimensions as the factory radio which is 171mm deep. The internal dimensions are 170mm x 42mm x 155mm (WxHxD)
Short version is 10mm shorter depth wise with internal dimensions of 170mm x 42mm x 145mm (WxHxD).
Parts needed
- Left radio bracket (39161-S2A-000) Qty. 1
- Right radio bracket (39111-S2A-000) Qty. 1
- Pan screws M5x5 Qty. 4
Printing - I'm still fairly new and I'm pretty sure there's better print settings but it did come out pretty solid. I printed this on a P1s using Bambu ASA (black) with Bambu Studio using the default wall/shell/infill settings and just enabled support (tree/slim)