Samyang/Rokinon 12mm F/2 FX Mount Rugged Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carrying case for the popular 12mm Samyang/Rokinon F/2 lens for the Fuji X Mount.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Everything is printable without supports. Print all parts labeled TPU at the end out of TPU, print the Lid_insert with 0 top layers, 1 perimeter and 10% gyroid infill.
You will need 6x M3x20mm screws for the hinge and latches.
If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction to maybe 1.2mm or just use the box without the seal installed.
Thanks to @Whity for the parametric design of the rugged box I used and @Yanev for laying the groundwork before him.
I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness.