1 / 5
Old Kregh Foreman Fence Stop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Old Kreg Foreman Fence Stop. Kreg no longer sells them. It is the swinging triangle part.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a Old Kreg Foreman Fence Stop. Kreg no longer sells them. It is the swinging triangle part. I sized the hole in it to be tapped ¼-20. You can also drill that hole out with a 9/32 drill and install a ¼-20 E-Z LCK wood insert. Use a soldering iron and slowly insert the insert in the print. I printed mine in PLA at 20% fill and it is strong enough but adjust as you want. There is a right and left so invert the print if you care. The long straight edge is in front. Enjoy.