Berserk Guts - Hueforge

Berserk Guts Hueforge

Print with 100% infill, a layer height of 0.08 mm, and a base layer of 0.16 mm.

The model size is 110 x 200 mm.

You can print with higher layer heights below the minimum depth of 0.48 mm.
The maximum depth is 2.2 mm, and the actual depth is 1.6 mm.

Used Filaments:

• PLA BambuLab Basic Black Transfer distance: 0.6
• PLA BambuLab Basic Jade White Transfer distance: 5
• PLA Sunlu Matte Red Transfer distance: 3

Filament Change Instructions:

• Start with Black.
• Switch to Jade White at Layer #9 (0.8 mm).
• Switch to Red at Layer #14 (1.2 mm) for the rest of the print.