GPU Support GabyTronicX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a graphics card holder, designed by me, GabyTronicX. Read Description, please.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a graphics card holder, designed by me, GabyTronicX. There are 2 models: Combo A & Combo B.
Combo A is the first version; some people told me it would slip, so I designed a non-slip TPU piece to place it as if it were a "Cover".
Combo B is the second version; it has space under the base, to place the non-slip TPU piece and make it more aesthetic and not visible.
Minimum height: 85mm
Maximum height: 130mm
Recommended configuration:
- 0.12mm layer height.
- 4 perimeters
- 15% Gyroid infill.
- I recommend Brim if you are going to print at high speeds.
- No supports, except for model B, which has support only on the part in contact with the bed.
ig: gabytronicx
Este es un soporte para tarjetas graficas, diseñado por mi, GabyTronicX. Hay 2 modelos: Combo A & Combo B.
El combo A es la primera versión; algunos me dijeron que se resbalaba, así que diseñé una pieza antideslizante en TPU para colocarsela como si fuera un "Cover".
El combo B es la segunda version; Cuenta con espacio debajo de la base, para colocar la pieza antideslizante en TPU y que sea mas estetica y no se vea.
Altura Minima: 85mm
Altura Maxima: 130mm
Configuración recomendada:
- Altura de capa de 0.12mm.
- 4 perimetros
- Relleno Giroide al 15%.
- Recomiendo Brim si vas a imprimir a altas velocidades.
- Sin soportes, a excepcion del modelo B, el cual lleva soporte solo en la parte en contacto con la cama.
ig: gabytronicx