1 / 1
Nooie Camera Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This bracket will fit a Nooie Indoor Cam or Baby Cam (As of current models released in 2025, future releases may or may not be compatible)
Can be mounted on a vertical surface or used to hang the camera overhead
Any “m4” size screw or bolt should work with the default screw holes. Basically if the threads are 3-4mm (thicker is fine, you'll just need to thread it through your printed material) and the head is under 9mm in diameter you should be fine. I used Kreg Pocket hole pan head screws with no issue