1 / 1
3D printed glider
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Public Domain
the wings should be printed vertically with a brim and one walls/shell.
2 top and bottom layers
The epical wing perform better but it's also harder to print.
the fuselage can be printed with 1 or 2 walls depend on your preferred durability.
It's advised to slow down and increase the temperature slightly to improve layer adhesion.
PLA+ or stronger material is preferred
Clearance between parts is 0.25-0.3 mm
ALSO, some extra counterweight is needed on the nose. I just taped some random nonsense until the center of gravity is around ⅓ of the leading edge of the wing.