1 / 3
Beetleweight Black Frost Kit Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A jig I made for my Black Frost UHMW chassis to drill the existing holes and add a weapon lock hole
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Use heat press inserts into the bottom frame piece and screw the top down into it. Using these bearings https://www.amazon.com/gp/product/B0164RWMJO?ie=UTF8&psc=1 (two per hole) to hand drill the existing mounting holes for the fingertech titanium beetle forks. The hole in the middle is for a weapon lock - running the full length of the chassis.
Printed in PETG on my X1c. May require a slight adjustment since my X1c currently has an ovaled XY motor pinion on it.