Raspberry Pi Zero Stack Plate
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.95 – €1.16 net (excluding VAT)
For file: RaspberryPiZero-Stack.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.05 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 1.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A bottom plate to create a Raspberry Pi Zero / Zero 2 stack
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this plate to stack my Raspberry Pi zeros and zero 2s.
The Raspberry Pi's can be screed down to the plate with four m2.5 screws, I used these https://www.amazon.co.uk/gp/product/B0894D654R/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
I used these stand-offs https://www.amazon.co.uk/gp/product/B08HLJ7C6S/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 to separate the plates and create the stack.
I have included the fusion 360 file along with the stl.