Wyze Camera Stand for CR10s PRO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a real quick stand for holding a Wyze Cam Camera. Installation is easy and flexible. The base just slips…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 558
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Here is a real quick stand for holding a Wyze Cam Camera.
Installation is easy and flexible. The base just slips between the tabletop and the bottom of the CR10s PRO printer. You can position it anywhere that works for you, and it can be removed or repositioned whenever you want.
The bend in the stand it intended to move the camera away from the printer enough to give you a good view. The amount of the off-set puts the camera out from the print bed to approximately the same amount as the motor housing on the left side of the XY carriage.
To attach the camera, I just command stripped the metal mounting plate that came with the printer to the inside surface. If you don't have the plate, a similar fender washer from your local hardware store should work as well. With the plate, you just pop the magnetic base on the plate.
I positioned mine on the front left corner. The print bed picture shows the view from that location.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
No
Supports:
No
0.2
Infill:
25%
Filament:
Inland PLA Black
Category: 3D Printer Accessories