1 / 3
Small switchboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple switchboard with three slots and optional plugs
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi.
I've designed a simple switch panel with three slots. Slot dimensions are 9.50mm x 13.50mm.
In the back there is an opening for wires. You can also drive wires through the third side of a model by drilling a hole in a surface you mount panel on.
I've also made a plug for slots that you are not using.
Print Settings
Print in anything you want PLA. PETG etc.
Print on a face side
Supports:
yes
Infill:
15%