iRobot Roomba Clean Base i & s Series Broken Tab Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Exact same model as the model it was remixed from except for a spring seat cutout.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After I printed the original and glued it to the broken part in my Roomba's clean base vacuum tube I realized the new part doesn't have a cut out for the spring. I used the original model and removed what I think is enough for the spring to go back into place. I didn't print my model because my glue was already set and I wasn't about to try and cut the new part off. I ended up heating the edge of the spring and pressing it into the PLA and then adding glue on top of the spring.
To be clear, the original model works great the way I did it.