AD5M Nozzle Cleaner v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Working off of Tyler's design, I remixed to fit on the right side of the plate.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 91
- Makes
- 0
- Views
- 1,466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Using @TylerLarson_2698570 excellent design after collaborating with him, I decided I needed more stability and magnets (never can have enough magnets) to the nozzle cleaner. As I am not a designer, I made the holes for the magnets oversized due to issues with the holes being too small.
I used these nozzle brush cleaners from Amazon: https://www.amazon.com/gp/product/B0DHDFHBBG/
Magnets I had laying around and I used 6x2mm and 5x2mm, I believe.
WARNING - ON LARGER PRINTS, the printhead can bump into this nozzle cleaner. USE AT YOUR OWN RISK!
Here is the GCODE for the unofficial KLIPPER mod that works for me. USE AT YOUR OWN RISK!!!!
[gcode_macro CLEAN_NOZZLE_PLA]
description: "Nozzle cleaning routine for PLA"
gcode:
G90
G1 Z9.13 F6000
G1 X110 Y-104 Z9.13 F10000
G1 X105 Y-64 Z9.173F7000
G1 X110 Y-104 Z9.13 F7000
G1 X106 Y-64 Z9.13 F7000
G1 X110 Y-104 Z9.13 F7000
G1 X107 Y-64 Z9.13 F7000
G1 X110 Y-104 Z9.13 F7000
G1 X108 Y-64 Z9.13 F7000
G1 X110 Y-104 Z9.13 F7000
G1 X109 Y-64 Z9.13 F7000
G1 X110 Y-104 Z9.13 F7000
G1 X100 Y-110 Z20 F7000
G92 E0