Furnace - Condensation hose hanger - no pinch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
High efficiency gas furnace condensation hose clamp to secure condensate drain to exhaust run (2" ID PVC)"
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Most high efficiency furnaces capture water vapor and pump it outside via a small (12mm OD) hose). These same furnaces typically run exhaust gasses out through a 51mm (2" ID) exhaust rated PVC pipe. Many installers rig the condensate drain hose along with the exhaust run and use zip ties to secure the hose to the pipe. Eventually the sag of the hose and an over-tight zip tie will pinch the drain hose.
This hose hanger lets you replace the zip ties with no-pinch hose hangers. I printed mine in PETG. No support required. Recommend 15 to 20% infill and 4 perimeters as slicer settings.