1 / 7
Corsair 4000D AirFlow Lower Motherboard Shroud — image 1
1 / 7

Corsair 4000D AirFlow Lower Motherboard Shroud

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A custom shroud mounted via existing holes on the bottom of the case covering the exposed pins on the motherboard.

Rating
0 / 5
Likes
11
Downloads
58
Makes
0
Views
649
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

This is a custom shroud that easily mounts via existing threaded holes found on the bottom of the internal case (top of the power supply compartment).

This shroud covers the exposed pins and connections on the lower edge of the installed motherboard.

Easily install using 4 x M3 x 5mm HDD/case screws that came with the case.

Printed using Black PLA filament inverted on it's top face with supports for the 4 tabs.

It seems my print shown has some roughness around the tabs due to the supports, however you may be able to improve your print quality by making adjustments as needed.

Note:  The threaded holes may only be available on newer models of the Corsair 4000D AirFlow RGB case.  My case was purchased in December 2024 and has the threaded holes available.  I've found that on a 4000D AirFlow case purchased in July 2022 does not have the threaded holes.

Tags