Peggit - Clamps holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use two mounts and a 1/2 inch PVC pipe to store a variety of clamp styles on a pegboard
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 32
- Makes
- 0
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Description
The mount uses the peggit system to connect to a pegboard. Using two mounts and a piece of ½ PVC pipe can store a variety of clamp styles - trigger clamps, c-clamps, spring clamps and Kreg face clamps.
Printing instruction
The model can be printed flat on the bed without supports:
It can be printed in PLA, using a 0.2 layer height and default infill for your printer.
In addition, you will need two Peggit Clips.
Installation instructions
For detailed instructions and the materials required to connect the peggit clips to the pegboard please check the Peggit - Pegboard Mounting System page.
The mounts are designed to be connected together with a ½ inch PVC pipe. Most big box stores have 2ft pre-cut pieces if you don't want to buy a full 10ft piece. Recommend orienting the mounts with the flat part facing outside, like in the image below to maximize the holding area: