1 / 1
Calibration Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a small Holder for attaching a Digital Caliper to a printer using T-Nuts for calibrating axis steps
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A simple Holder to attach an Digital Caliper to your Printer, using T-Nuts
Printing Parameters:
Material: doesnt matter, used ABS+
Nozzle: 0.4
Layerheight: 0.2
Infil: 20%
BOM:
1x M5x20 Screw
2x M5 Washers
1x M5 Nut
2x M3x10 Screw
2x M3x12 Screw
2x T-Nut M3
2x M3x5,7 Heated insert
Assembly:
- Insert the Heated inserts into the 2 holes on the part Caliper-Mount
- Insert Caliper-Mount Hinge into Base Hinge
- Add 1 Washer on the M5 Screw, insert it into the hinge, add 2nd Washer and the Nut
- Insert Caliper into the Caliper-Mount (see picture) make sure to allow the longest possible movement for the Caliper
- Insert 2x M3x12 Screw into the 2 Holes in part Base, add T nut from the other Side
- Add Caliper-Mount-Top ontop the caliper and insert the 2x M3x10 Screws and tighten them, this will Sandwitch the Caliper into the mount.