Adapter Black & Decker BDM55 to osVac M32
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect a Black & Decker Sander Mouse BDM55 Type 1 to the osVac eco system
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
German translation after the english part
Adapter to connect a Black & Decker Sander Mouse BDM55 Type 1 to the osVac system. The osVac M32 connector is created by the library Vacuum hose adapters for OpenSCAD.
Prints with small Supports. In have used "Tree supports" under the noses of the osVac connector. Currently not tested, so i don't know if the walls are strong enough (min. wall strength: 1.6mm), but i will report.
Updates:
- 2025-02-03: Version 4
- shortened transition between machine connection and osVAC
- offset of the osVAC M32 to the machine connection reduced so that there is sufficient clearance to the power cord
- max. overhang of 45 degrees (in the inside)
- 2025-02-01: Version 3
- “straight” transition between machine connection and osVAC
- removed because the osVAC M32 was positioned too high
- 2025-01-31: Version 2
- Elimination of small gaps
- 30% infill, but pay attention to solid walls
----
Adapter zum Anschluss eines Black & Decker Schwingschleifers BDM55 Type 1 an das osVac-System. Der osVac M32-Anschluss wird von der Bibliothek Vacuum hose adapters for OpenSCAD erstellt.
Druckt mit kleinen Supports. Ich habe „Tree Supports“ unter den Nasen des osVac-Anschlusses verwendet. Derzeit nicht getestet, so weiß ich nicht, ob die Wände stark genug sind (min. 1,6mm), aber ich werde berichten.
Updates:
- 03.02.2025: Version 4
- verkürzter Übergang zwischen Maschinenanschluss und osVAC
- Versatz des osVAC M32 zum Maschinenanschluss verringert, damit genügend Spiel zum Kabel bleibt
- max. 45 Grad Überhang (im Inneren)
- 01.02.2025: Version 3
- mit einem "geraden" Übergang zwischen Maschinenanschluss und osVAC
- entfernt, da der osVAC M32 zu hoch angeordnet war
- 31.01.2025: Version 2
- Beseitigung kleiner Gaps
- 30% Infill, aber auf massive Wände achten
Print Settings
Printer Brand: Sovol 3D
Printer: Sovol SV06
Rafts: No
Supports: Yes
Infill: 100%
Filament: Sunlu PETG